Test your network quality below
POWERED BY M-LAB
This test measures the connection to your current device, not the speed delivered directly to your gateway or modem.
This test uses Measurement Lab (M-Lab). M-Lab collects measurement data, including your public IP address, and makes test data publicly available. Read M-Lab's Privacy Policy
This free network test goes beyond raw speed — it measures the stability of your connection. Alongside download and upload speeds, pay close attention to ping and jitter: they reveal whether your network is steady enough for gaming, video calls, and live streaming.
A fast but unstable network causes lag spikes, frozen video, and robotic audio. If your ping jumps around or jitter reads high, the troubleshooting guides below will help you stabilize it.
Run the test three times in a row. If download speed is consistent but ping or jitter swing wildly, your issue is stability — not bandwidth. Common culprits: Wi-Fi interference, bufferbloat on an old router, or a congested upload link.
Test wired vs Wi-Fi to isolate the cause. If wired is stable but Wi-Fi is not, change your Wi-Fi channel, move to 5 GHz, or upgrade the router. If both are unstable, restart the modem and contact your provider about line quality.
For competitive gaming: ping under 30 ms and jitter under 5 ms. For video calls: ping under 100 ms and jitter under 15 ms. For 4K streaming: stable download above 25 Mbps matters more than ping.
If jitter is high, try enabling QoS (Quality of Service) on your router and prioritizing your gaming or work device.
For the most accurate result, connect your computer directly to your router with an Ethernet cable if possible. If you must use Wi-Fi, stand close to the router and disconnect other devices during the test.
Close streaming apps, cloud backups, and other browser tabs before clicking Start. Run the test 2–3 times at different times of day — speeds often dip during evening peak hours (7–11 PM) when many households are online.
Download speed (Mbps) controls how fast you can stream, browse, and download files. Upload speed (Mbps) affects video calls, live streaming, and cloud backups. Ping (ms) measures responsiveness — under 50 ms is good for gaming and calls. Jitter (ms) measures consistency — lower is better, especially for voice and video.
Compare your download result to your plan’s advertised speed. Most providers advertise “up to” speeds, so a result within about 20% of the advertised rate is normal.
A speed test focuses on download and upload rates. A network test also emphasizes stability metrics — ping and jitter — which determine how smooth real-time apps feel.